GEN
INFO
R-9
SPECIAL SERVICE TOOLS
SPECIAL TOOLS
1-4
SPECIAL SERVICE TOOLS
The appropriate Special Service Tools are necessary for proper maintenance of the Motorcycle.
Using the correct Special Service Tool will help to prevent damage caused by the use of improper
tools or improvised techniques. The following is the detailed list of all Special Service Tools with
their application.
Refer to the list provided to avoid errors when placing an order for Special service tools.
This tool is used to hold the Magneto when re-
moving or installing the Magneto Securing Nut
1. Magnet o Holder
This tool is used to adjust Valve clear-
ance.
5. Valve Clearance Adjusting Tool.
YSST - 606
This tool is used to replace Piston Pin.
6. Piston Pin Replacer
This tool is used to remove the Magneto
2. Magneto Puller with Spacer
YSST - 602
This tool is used to to remove and install
Valve Spring Assemblies.
3. Valve Spring Compressor
YSST - 603
This tool is needed to support the Piston
while installing Cylinder.
4. Piston Base
YSST - 604
This tool is used to hold the Clutch Hub when
removing or installing Clutch Main Shaft Nut.
8. Clutch Hub Holder
YSST - 233
This tool is used to remove Rocker Arm Shaft.
7. Rocker Arm Shaft Puller
YSST - 608 (Old)YSST - 608A (New)
