ELEC
R-199
SIGNAL SYSTEM
1. BULB AND BULB SOCKET
• Check the Bulb and Bulb Socket continuity
C. If the flasher light and/or turn
indicator light fails to blink.
Replace the Bulb and/or Bulb socket
2. TURN SWITCH
• Disconnect the Handlebar Switch (left) cou-
pler from Wireharness.
• Check the switch component for the conti-
nuity between “Brown/White and Darkgreen”
and “Brown/White and Chocolate”.
Replace the left Handlebar Switch.
CONTINUITY
CONTINUITY
MEETS
SPECIFICATION
NO CONTINUITY
NO CONTINUITY
OUT OF SPECIFICATION
The wiring circuit from Main Switch to
Flasher Relay connector is faulty. Repair/
Replace
7-18
3. VOLTAGE
• Connect the Multimeter (DC20 V) to the
Flasher Relay coupler.
• Turn the Main Switch to ‘ON’ .
• Check or voltage (12V) of the “Brown” ¿
lead at the Flasher Relay terminal and (-)
terminal body earth (Black Wire).
æ
Multimeter (+) lead Ÿ Brown Terminal ¿
Multimeter (-) lead Ÿ Black Terminal À
