INSP
ADJ
L-64
REAR SHOCK ABSORBER ADJUSTMENT
ææææææææææææææææææææææææææææææææææ
Adjustment steps:
• Turn the Adjuster Ring in or out.
ææææææææææææææææææææææææææææææææææ
TYRE INSPECTION
1. Measure :
• Tyre inflation pressure
Out of specification Ÿ Adjust.
3-25
Adjustment numbers:
Standard
3
Minimum
1
Maximum
5
WARNING
CAUTION:
• Never turn the Adjuster beyond the maxi-
mum or minimum setting.
• Always adjust each Shock Absorber to the
same setting.
WARNING
• Tyre inflation pressure should only be
checked and adjusted when the Tyre tem-
perature equals the ambient air tempera-
ture. Tyre inflation pressure and suspen-
sion must be adjusted according to the
cargo, rider, pasenger and accessories
(fairing, saddlebags, etc. if approved for
this model), and according to whether the
Motorcycle will be operated at high speed
or not.
NEVER OVERLOAD THE MOTORCYCLE.
• Operation of an overloaded Motorcycle
could cause tyre damage, accident or injury.
Turning toward ç Ÿ
Spring preload is
increased.
Turning toward è Ÿ
Spring preload is
decreased.
