manualshive.com logo in svg

Yamaha GRIZZLY 350 YFM35FGY, Owner'S Manual

Share
Download
Yamaha GRIZZLY 350 YFM35FGY Owner'S Manual Download Page 118

8-40

8

If a fuse is blown, replace it as follows.

1. Turn the key to “OFF” and turn off all electrical

circuits.

NOTICE

ECB00640

To prevent accidental short-circuiting, turn off
the main switch when checking or replacing a
fuse.

2. Remove the blown fuse, and then install a

new fuse of the specified amperage.

WARNING

EWB02171

Always use a fuse of the specified rating, and
never use a substitute object in place of the
proper fuse. An improper fuse or a substitute
object can cause damage to the electrical sys-
tem, which could lead to a fire.

3. Turn the key to “ON” and turn on the electrical

circuits to check if the devices operate.

1. Headlight fuse
2. Ignition fuse

3. Auxiliary DC jack fuse (for optional auxiliary DC jack)

4. Four-wheel-drive motor fuse
5. Signaling system fuse

6. Spare fuse

Specified fuses:

Main fuse:

30.0 A

Headlight fuse:

15.0 A

Ignition fuse:

15.0 A

Four-wheel-drive motor fuse:

3.0 A

Signaling system fuse:

10.0 A

Auxiliary DC jack fuse:

10.0 A

U5UH65E0.book  Page 40  Monday, June 16, 2008  10:34 AM

Summary of Contents for GRIZZLY 350 YFM35FGY











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands