Yamaha FZS1000N, Service Manual

Page: 57 / 394

2-38
A Fasten the main switch lead and handlebar switch lead with a plastic
guide.
B Fasten the water-head hose and water-carburetor hose with a plastic
band.
C Fasten the clutch cable with a plastic band.
D Fasten the clutch cable with a steel clamp.
E Fasten the wire harness with a plastic band.
F To the fuel sender.
G Route the fuel sender lead inside the seat rail.
H Route the battery negative lead forward the frame stay.
I Route the main harness inside the rear fender groove.
J Fasten the wire harness, sidestand switch lead, oil level switch and
flame with a plastic band. Do not fasten the Acgenerator lead (white).
K Route the starter motor lead and battery negative lead inside the plastic
band.
L Route the all hoses outside the fuel hose.
M Route the fuel hose through the steel guide.
CABLE ROUTING
SPEC
1
Starter cable
2
Clutch cable
3
Handlebar switch lead (left)
4
Main switch lead
5
EXUP servo motor
6
Starting circuit cutoff relay
7
Starter motor lead
8
Fan motor relay
9
Air cleaner case drain hose
10
Sidestand switch lead
11
oil level switch lead
12
ACgenerator lead
13
Water-head pipe
14
Water-carburetor hose
15
Throttle cable 2
16
Throttle cable 1
17
EXUP cable