Yamaha FZS1000N, Service Manual

Page: 244 / 394

5-41
CLUTCH
ENG
NOTE:
NOTE:
2. Measure:
S
friction plate thickness
Out of specification
!
Replace the friction
plates as a set.
Measure the friction plate at four places.
Friction plate thickness
Friction plate
a
3.42
X
3.58 mm
(0.135
X
0.141 in)
<Limit>: 3.32 mm (0.131 in)
Friction plate
b
2.92
X
3.08 mm
(0.115
X
0.121 in)
<Limit>: 2.82 mm (0.111 in)
3. Measure:
S
assembly width
a
Out of specification
!
Adjust.
Assembly width
43.1
X
43.9 mm (1.70
X
1.73 in)
a. Assembly width adjusted by clutch plate 1
and 2 .
b. Select the clutch plate from the following
table.
Clutch plate 1
Part No. Thickness
168-16325-00
1.6 mm
(0.06 in)
31A-16325-00
2.0 mm
(0.08 in)
STD
168-16324-00
2.3 mm
(0.09 in)
Clutch plate 2
Part No. Thickness
31A-16325-00
2.0 mm
(0.08 in)
STD
168-16324-00
2.3 mm
(0.09 in)
When adjusting the clutch assembly width [by
replacing the clutch plate(s)], be sure to replace
the clutch plate
1 first. After replacing the
cltuch plate 1 , if specifications cannot be met,
replace the clutch plate 2 .