Yamaha FZS1000N, Service Manual

Page: 132 / 394

4-7
FRONT WHEEL AND BRAKE DISCS
CHAS
CAUTION:
NOTE:
72 Nm (7.2 m kg, 52 ft lb)
23 Nm (2.3 m kg, 17 ft lb)
CAUTION:
40 Nm (4.0 m kg, 29 ft lb)
WARNING
EAS00539
ASSEMBLING THE FRONT WHEEL
1. Install:
wheel bearings
New
oil seals
New
a. Install the new wheel bearings and oil seals
in the reverse order of disassembly.
Do not contact the wheel bearing inner race
1 or balls 2 . Contact should be made only
with the outer race 3 .
Use a shocket 4 that matches the diameter of
the wheel bearing outer race and oil seal.
EAS00544
INSTALLING THE FRONT WHEEL
The following procedure applies to both brake
discs.
1. Lubricate:
wheel axle
oil seal lips
Recommended lubricant
Lithium soap base grease
2. Tighten:
wheel axle 1
wheel axle pinch bolt
2
Before tightening the wheel axle nut, push
down hard on the handlebar several times and
check if the front fork rebounds smoothly.
3. Install:
brake caliper
Make sure that the brake hose is routed
properly.