Yamaha FZ6-SS 2004, Service Manual, Page: 71 / 456

2-45
AE Press the battery negative lead into the space be-
tween the ribs of the frame.
AF Pass the spark plug leads #1 and #4 through the
slit of the cover 2.
AG Pass the spark plug lead #2 through the inner
hole of the cover 2.
AH Pass the spark plug lead #3 through the outer
hole of the cover 2.
AI Route the spark plug lead #4 behind the air cut-off
valve hose.
AJ Point the spark plug caps of #1 to #4 to the direc-
tion as shown in the illustration.
AK Route the spark plug lead #3 under the air cut-off
valve hose.
AL Route the spark plug lead #2 behind the air cut-off
valve hose.
CABLE ROUTING
SPEC
S To the license plate light.
T To the tail/brake light.
U Insert the enwinding clamp of the wire harness into
the hole of the rear frame.
V Attach the rectifier regulator lead to the clamp of the
rectifier bracket.
W To the engine ground.
X To the fuel injection.
Y To the fuel pump.
Z Route the clutch cable under the fuel injection lead.
AA Pass the clutch cables through the clamp, and
then install the clamp to the cover. Position of the
clamp is forward of the cable stopper.
AB To the main switch.
AC To the immobilizer.
AD Route the starter relay lead outside of the main
switch and immobilizer lead.