Yamaha FZ1-SW Owner'S Manual Download | Manualshive

Page: 35 / 98

background image

INSTRUMENT AND CONTROL FUNCTIONS

3-19

3

Rebound damping force

The rebound damping force is adjusted
on the right front fork leg only. To in-
crease the rebound damping force and
thereby harden the rebound damping,
turn the adjusting screw in direction (a).
To decrease the rebound damping
force and thereby soften the rebound
damping, turn the adjusting screw in di-
rection (b).

NOTE:

Be sure to perform this adjustment on
the right front fork leg.

Compression damping force

The compression damping force is ad-
justed on the left front fork leg only. To
increase the compression damping

force and thereby harden the compres-
sion damping, turn the adjusting screw
in direction (a). To decrease the com-
pression damping force and thereby
soften the compression damping, turn
the adjusting screw in direction (b).

NOTE:

Be sure to perform this adjustment on
the left front fork leg.

CAUTION:

ECA10100

Never attempt to turn an adjusting
mechanism beyond the maximum or
minimum settings.

Spring preload setting:

Minimum (soft):

8

Standard:

5.5

Maximum (hard):

0

1. Rebound damping force adjusting screw

Rebound damping setting:

Minimum (soft):

26 click(s) in direction (b)*

Standard:

18 click(s) in direction (b)*

Maximum (hard):

1 click(s) in direction (b)*

* With the adjusting screw fully turned

in direction (a)

1. Compression damping force adjusting screw

Compression damping setting:

Minimum (soft):

26 click(s) in direction (b)*

Standard:

5 click(s) in direction (b)*

Maximum (hard):

1 click(s) in direction (b)*

* With the adjusting screw fully turned

in direction (a)

U3C321E0.book Page 19 Friday, September 29, 2006 4:57 PM

ProCarManuals.com

«
...
33
34
35
36
37
...
»

Summary of Contents for FZ1-SW



































































































Reviews:

No comments

Related manuals for FZ1-SW

Brand: ZERO GRAVITY Pages: 6

Brand: Rally Pack Pages: 2

Brand: R&G Pages: 4

Brand: Honda Pages: 91

Brand: MV Agusta Pages: 36

Brand: KTM Pages: 38

Brand: kellermann Pages: 2

Brand: TM Pages: 80

Brand: Roof Pages: 20

Brand: APRILIA Pages: 170

Kawasaki NINJA 650

Brand: Arrow Pages: 7

Brand: Yamaha Pages: 93

Brand: Yamaha Pages: 100

Brand: Yamaha Pages: 102

Brand: Yamaha Pages: 101

Brand: Yamaha Pages: 125

Brand: Yamaha Pages: 454

DERBI GPR50-R 1997

Brand: NACIONAL MOTOR Pages: 57

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands