5-33
ARRANQUE ELÉCTRICO
STARTER REMOVAL
1.
Remove:
•
Starter "1"
•
Motor front cover
start / brush holder assembly "2"
NOTE:
Before disassembling the starter, make alignment
marks "a" in the starter cover and front cover
starter / brush holder assembly.
1
2
NOTE:
To ensure proper operation of the switch must
be lowered mica.
4.
Measure:
•
Armor resistances (commutator and
insulation)
OOS
Replace
יו
the motor
boot.
to
STARTER INSPECTION
1.
Check:
•
Switch
Dirt
Cleaning יו
with 600 grit
sandpaper.
2.
Measure:
•
Diameter of the switch "a"
OOS
Replace
יו
the
starter.
a.
Measure the resistance of the armor with the
multimeter.
Multimeter
Armor Coil
Resistance of the switch "1"
Ù 0.0315 to 0.0385 at 20 ° C (68 ° F)
Limit
17.6 mm
b.
If the resistance is out of specification
Replace
יו
starter.
to
3.
Measure:
•
Mica recess "a"
OOS
יו
Undercut the mica to the proper size
with a saw blade for metal frosted, until it
clicks into the switch.
Mica undercut (depth)
2.10 mm
5.
Measure:
•
Brush length "a"
OOS
Replace יו
the
motor front cover
start / brush holder assembly
Brushes length "a"
7.5 mm
Limit
4.0 mm
