manualshive.com logo in svg

Yamaha FX10RTRSY, Owner'S Manual

The Yamaha FX10RTRSY Owner's Manual is an essential guide for maximizing your experience with this exceptional product. You can easily download this comprehensive manual for free from manualshive.com, ensuring you have all the information you need to fully enjoy your Yamaha FX10RTRSY.

Share
Download
background image

Periodic maintenance and adjustment

68

●

INTERNAL: Drink large quantities of wa-
ter or milk. Follow with milk of magne-
sia, beaten egg, or vegetable oil. Call
physician immediately.

●

EYES: Flush with water for 15 minutes
and get prompt medical attention.

Batteries produce explosive gases. Keep
sparks, flame, cigarettes, etc. away. Venti-
late when charging or using in an en-
closed space. Always shield your eyes
when working near batteries.
KEEP OUT OF THE REACH OF CHILDREN.

Charge or have a Yamaha dealer charge the
battery as soon as possible if it seems to have
discharged. Keep in mind that the battery
tends to discharge more quickly if the snow-
mobile is equipped with electrical accesso-
ries.

WARNING

EWS00610

●

Never smoke around the battery while it
is being charged. Sparks may ignite the
hydrogen gas created by the battery.

●

Disconnect the negative lead first, then
the positive lead from the battery.

●

Connect the positive lead first, then the
negative lead to the battery when install-
ing the battery.

●

Never connect the battery to or discon-
nect it from the snowmobile while it is
being charged. Sparks may ignite the
hydrogen gas created by the battery.

●

Make sure that the battery terminals are
tight.

NOTICE

ECS00842

●

To charge a VRLA (Valve Regulated
Lead Acid) battery, a special (constant-
voltage) battery charger is required. If
you do not have access to a constant-
voltage battery charger, have a Yamaha

dealer charge your battery. Using a con-
ventional battery charger will damage
the battery.

●

Do not charge the battery quickly.

ESU12872

Replacing a fuse 

WARNING

EWS00550

Be sure to use the specified fuse. A wrong
fuse could cause electrical system dam-
age or A FIRE HAZARD.

NOTICE

ECS00631

Be sure to turn the main switch to the off
position and disconnect the negative bat-
tery lead to prevent accidental short-cir-
cuiting.

1.

Remove the shroud and the right side
cover. (See page 44 for removal proce-
dures.)

2.

Disconnect the negative battery lead.

3.

Replace the blown fuse with one of the
proper amperage.

1. Negative battery lead

1

U8HK10E0.book  Page 68  Tuesday, June 10, 2008  1:58 PM

Summary of Contents for FX10RTRSY





























































































Reviews:

No comments

Related manuals for FX10RTRSY

Brands by name

Popular brands

Load more brands