manualshive.com logo in svg

Yamaha FX10RTRSY, Owner'S Manual

The Yamaha FX10RTRSY Owner's Manual is an essential guide for maximizing your experience with this exceptional product. You can easily download this comprehensive manual for free from manualshive.com, ensuring you have all the information you need to fully enjoy your Yamaha FX10RTRSY.

Share
Download
background image

Control functions

17

ESU12733

Drive guard 

WARNING

EWS00401

●

Coming in contact with the rotating V-
belt or clutch parts can cause severe in-
jury or death. Never run the engine with
the drive guard removed.

●

Make sure that the drive guard is tight-
ened securely before operating the
snowmobile to protect against severe
injury or death from a broken V-belt or
other part should it come off the snow-
mobile while it is in operation.

NOTICE

ECS00830

Never run the engine with the V-belt re-
moved. Clutch components can be dam-
aged.

The drive guard is designed to protect the V-
belt clutch and V-belt in case parts break or
come loose.
The drive guard is located behind the left side
cover. (See page 44 for removal procedures.)

To remove the drive guard
1.

Pull out the drive guard locking pin from
the drive guard rear holder.

2.

Lift up the rear of the drive guard as
shown, and then pull the guard rearward
to remove it.

To install the drive guard
1.

Insert the projections on the drive guard
front holder into the slots in the front of the
drive guard.

1. Left side cover

1

1. Drive guard

2. Drive guard locking pin

1

2

U8HK10E0.book  Page 17  Tuesday, June 10, 2008  1:58 PM

Summary of Contents for FX10RTRSY





























































































Reviews:

No comments

Related manuals for FX10RTRSY

BOMBARDIER Ski-Doo 1978 Series Operator'S Manual preview
Ski-Doo 1978 Series
Brand: BOMBARDIER Pages: 44

Brands by name

Popular brands

Load more brands