manualshive.com logo in svg

Yamaha FX10RTRSY, Owner'S Manual

The Yamaha FX10RTRSY Owner's Manual is an essential guide for maximizing your experience with this exceptional product. You can easily download this comprehensive manual for free from manualshive.com, ensuring you have all the information you need to fully enjoy your Yamaha FX10RTRSY.

Share
Download
background image

Control functions

16

ESU13032

Shift lever 

The shift lever is used to put the snowmobile
into forward or reverse. Before shifting, wait
for the snowmobile to come to a complete
stop with the engine idling. Pull the shift lever
out, slide it to “FWD” or to “REV” until it stops,
and then push it back in.

NOTICE

ECS00072

Do not use the shift lever while the snow-
mobile is moving, otherwise the drive train
could be damaged.

ESU10722

Shroud and covers 

Securely fasten the shroud and covers before
operating the snowmobile. (See page 44 for
removal and installation procedures.)

1. Shift lever

1. Pull out.

2. Slide to “FWD” (forward).
3. Push in.

1. Pull out.

2. Slide to “REV” (reverse).

3. Push in.

1. Shroud

2. Right side cover

1

2

U8HK10E0.book  Page 16  Tuesday, June 10, 2008  1:58 PM

Summary of Contents for FX10RTRSY





























































































Reviews:

No comments

Related manuals for FX10RTRSY

Brands by name

Popular brands

Load more brands