manualshive.com logo in svg

Yamaha FX10RTRSY, Owner'S Manual

The Yamaha FX10RTRSY Owner's Manual is an essential guide for maximizing your experience with this exceptional product. You can easily download this comprehensive manual for free from manualshive.com, ensuring you have all the information you need to fully enjoy your Yamaha FX10RTRSY.

Share
Download
background image

Control functions

18

2.

Align the slots in the rear of the drive
guard with the projections on the drive
guard rear holder, and then insert the
drive guard locking pin into the holder.

ESU13041

Storage pouch 

The storage pouch is located under the
shroud. Use the storage pouch to store the
tool kit, manuals, spare parts, such as the V-
belt, or other small items.

To remove the storage pouch
Unhook the swivel hook from the storage
pouch bracket, and then pull out the storage
pouch as shown.

To install the storage pouch
Place the storage pouch in the original posi-
tion, and then hook the swivel hook onto the
bracket.

1. Drive guard

1. Drive guard

2. Drive guard locking pin

1

2

1

1. Storage pouch

1. Swivel hook

2. Storage pouch bracket

U8HK10E0.book  Page 18  Tuesday, June 10, 2008  1:58 PM

Summary of Contents for FX10RTRSY





























































































Reviews:

No comments

Related manuals for FX10RTRSY

Brands by name

Popular brands

Load more brands