manualshive.com logo in svg

Yamaha FX10RTRSY, Owner'S Manual

The Yamaha FX10RTRSY Owner's Manual is an essential guide for maximizing your experience with this exceptional product. You can easily download this comprehensive manual for free from manualshive.com, ensuring you have all the information you need to fully enjoy your Yamaha FX10RTRSY.

Share
Download
background image

Periodic maintenance and adjustment

48

1.

Remove the shroud, the left side cover,
and the right side cover. (See page 44 for
removal procedures.)

2.

Remove the headlight unit stay quick fas-
teners and disconnect the air tempera-
ture sensor coupler.

3.

Unhook the air filter case cover fasteners.

4.

Lift the headlight unit and headlight unit
stay, and then slide the air filter case cov-
er toward the right side of the snowmobile
and remove it.

5.

Lift up the air filter element frame and
check the air filter element. If there is any
snow on the air filter element, remove the
element, brush off the snow, and then in-
stall the air filter element.

6.

Place the air filter element frame in the
original position, and then install the air
filter case cover.

7.

Hook the fasteners onto the air filter case
cover.

1. Quick fastener
2. Air temperature sensor coupler

1. Air filter case cover fastener

1. Air filter case cover

U8HK10E0.book  Page 48  Tuesday, June 10, 2008  1:58 PM

Summary of Contents for FX10RTRSY





























































































Reviews:

No comments

Related manuals for FX10RTRSY

Brands by name

Popular brands

Load more brands