manualshive.com logo in svg

Yamaha FX10RTRSY, Owner'S Manual

The Yamaha FX10RTRSY Owner's Manual is an essential guide for maximizing your experience with this exceptional product. You can easily download this comprehensive manual for free from manualshive.com, ensuring you have all the information you need to fully enjoy your Yamaha FX10RTRSY.

Share
Download
background image

Periodic maintenance and adjustment

44

ESU13001

Tool kit 

The service information included in this man-
ual and the tools provided in the owner’s tool
kit are intended to assist you in the perfor-
mance of preventive maintenance and minor
repairs. However, additional tools such as a
torque wrench may be necessary to perform
certain maintenance work correctly.

NOTICE

ECS00780

Before starting the engine, make sure that
the tool kit is securely fastened and that
the storage pouch zipper is completely
closed.

TIP

If you do not have a torque wrench available
during a service operation requiring one, take
your snowmobile to a Yamaha dealer to
check the torque settings and adjust them if
necessary.

ESU12782

Removing and installing the 
shroud and covers 

WARNING

EWS00091

Be sure shroud and covers are secured
before operation. A loose shroud or cover
could move and cause loss of control.

Shroud

To remove the shroud
Loosen the fasteners, and then slide the
shroud forward.

To install the shroud
Hook the end of the shroud onto the front cov-
er, insert the projections on the shroud into
the slots in the headlight unit stay, and then
tighten the fasteners.

1. Tool kit

1. Fastener

1. Shroud

1

U8HK10E0.book  Page 44  Tuesday, June 10, 2008  1:58 PM

Summary of Contents for FX10RTRSY





























































































Reviews:

No comments

Related manuals for FX10RTRSY

Brands by name

Popular brands

Load more brands