manualshive.com logo in svg

Yamaha FX10RTRSY, Owner'S Manual

The Yamaha FX10RTRSY Owner's Manual is an essential guide for maximizing your experience with this exceptional product. You can easily download this comprehensive manual for free from manualshive.com, ensuring you have all the information you need to fully enjoy your Yamaha FX10RTRSY.

Share
Download
background image

Control functions

26

ESU13440

Adjusting the damping forces of the 
center and rear shock absorbers 
(FX10RTRS), or damping force of the 
rear shock absorber (FX10XT) 

NOTICE

ECS00881

●

Do not continue to turn the adjuster in
direction (a) after it stops. The shock ab-
sorber could be damaged and damping
force adjustments will not be able to be
made.

●

Do not turn the adjuster in direction (b)
beyond the adjustable range. Even if the
adjuster is continually turned beyond
the adjustable range, there will be no
change in the damping force.

FX10RTRS

The compression and rebound damping forc-
es can be adjusted by turning the adjusting
bolt, dial, knob, or screw.
Center shock absorber
To increase the compression damping force,
turn the adjusting screw in direction (a). To
decrease the compression damping force,
turn the adjusting screw in direction (b).

To increase the rebound damping force, turn
the adjusting dial in direction (a). To decrease
the rebound damping force, turn the adjusting
dial in direction (b).

1. Compression damping force adjusting 

screw

1

(b)

(a)

Compression damping force setting:

Minimum (soft):

12 click(s) in direction (b)*

Standard:

6 click(s) in direction (b)*

Maximum (hard):

2 click(s) in direction (b)*

* With the adjusting screw fully turned in 

direction (a)

1. Rebound damping force adjusting dial

Rebound damping force setting:

Minimum (soft):

20 click(s) in direction (b)*

Standard:

11 click(s) in direction (b)*

Maximum (hard):

3 click(s) in direction (b)*

* With the adjusting dial fully turned in di-

rection (a)

U8HK10E0.book  Page 26  Tuesday, June 10, 2008  1:58 PM

Summary of Contents for FX10RTRSY





























































































Reviews:

No comments

Related manuals for FX10RTRSY

Yard-Man 31220-8 Owner'S Manual preview
31220-8
Brand: Yard-Man Pages: 20
Yamaha FX Nytro FX10X Assembly Manual preview
FX Nytro FX10X
Brand: Yamaha Pages: 84

Brands by name

Popular brands

Load more brands