Yamaha FS1R, Data List

Page: 29 / 44

29
Wah+OD+Dly Same parameters for Wah+DS+Dly
Range(Default) Param# Ctrl Dest Description
Sensitivty *0~127(80) 11C I:Sens Sensitivty
Cutoff Freq *0~127(35) 11E I:CutofFreq Cutoff Frequency (Hz)
Resonance *1.0~12.0(3.0) 120 I:Resonance Resonance
Release *10~680(170) 122 I:Release Time until the wah filter is closed (msec)
Drive *0~127(16) 10E I:Drive Degree of distortion
OutputLevel *0~127(87) 110 I:Out Level OutputLevel
DS Low Gain *-12~+12(+ 0) 112 I:DSLowGain Gain with which the distortion will boost/cut the low range (dB)
DS Mid Gain *-12~+12(+ 0) 114 I:DSMidGain Gain with which the distortion will boost/cut the middle range (dB)
Delay 0.1~1365.0(160.0) 108 Delay time (msec)
FB Level *-63~+63(+20) 10A I:FB Level Feedback Level
Delay Mix *0~127(50) 10C I:Delay Mix Depth of delay effect
Dry/Wet *D63>W,D=W,D<W63(D<W63) 11A I:Dry/Wet Balance between the dry sound and effect sound
Ins Pan L63~ C ~R63 130 Insertion Pan
SendIns-Rev 0~127 131 Insertion-to-Reverb Send Level
SendIns-Var 0~127 132 Insertion-to-Variation Send Level
InsDryLevel 0~127 133 Insertion Dry Level
Lo-Fi
Range(Default) Param# Ctrl Dest Description
Smpl Freq *48k~375(16.0k) 108 I:Smpl Freq Sampling Frequency (Hz)
Word Length *1~127(1) 10A I:Word Leng Differential bit length of DPCM
Output Gain *-6~+36(- 3) 10C I:Out Gain Output Gain
LPFCutoff *63~18.0k,thru(thru) 10E I:LPFCutoff Frequency at which the low pass filter will cut the high range (Hz)
LPF Reso *1.0~12.0(2.9) 112 I:LPF Reso Resonance of low pass filter
Filter thru,pbass,radio,tel,clean,low(clean) 110 Characteristics (quality) of low pass filter
Bit Assign 0~6(1) 114 Input signal depth of DPCM
Emphasis off,on(off) 116 Adjustment of high frequency response
Dry/Wet *D63>W,D=W,D<W63(D<W63) 11A I:Dry/Wet Balance between the dry sound and effect sound
Ins Pan L63~ C ~R63 130 Insertion Pan
SendIns-Rev 0~127 131 Insertion-to-Reverb Send Level
SendIns-Var 0~127 132 Insertion-to-Variation Send Level
InsDryLevel 0~127 133 Insertion Dry Level
3-Band EQ
Range(Default) Param# Ctrl Dest Description
Low Freq *50~2.0k(180) 112 I:Low Freq Frequency at which the EQ will boost/cut the low range (Hz)
Low Gain *-12~+12(+ 0) 108 I:Low Gain Amount of gain by which the EQ will boost/cut the low range (dB)
Mid Freq *100~10.0k(1.0k) 10A I:Mid Freq Frequency at which the EQ will boost/cut the mid range (Hz)
Mid Gain *-12~+12(+ 0) 10C I:Mid Gain Amount of gain by which the EQ will boost/cut the mid range (dB)
Mid Q *1.0~12.0(5.0) 10E I:Mid Q Mid Q
High Freq *500~16.0k(8.0k) 114 I:High Freq Frequency at which the EQ will boost/cut the high range (Hz)
High Gain *-12~+12(+ 0) 110 I:High Gain Amount of gain by which the EQ will boost/cut the high range (dB)
Mode mono,stereo(mono) 124 Mono/stereo input mode selection
Ins Pan L63~ C ~R63 130 Insertion Pan
SendIns-Rev 0~127 131 Insertion-to-Reverb Send Level
SendIns-Var 0~127 132 Insertion-to-Variation Send Level
InsDryLevel 0~127 133 Insertion Dry Level
HM Enhncer
Range(Default) Param# Ctrl Dest Description
HPFCutoff *500~16.0k(5.6k) 108 I:HPFCutoff Frequency at which the high pass filter will cut the low range
of the effect sound (Hz)
Drive *0~127(20) 10A I:Drive Degree with which the exciter effect will be applied
Mix Level *0~127(30) 10C I:Mix Level Level at which the effect sound will be mixed into the dry sound
Ins Pan L63~ C ~R63 130 Insertion Pan
SendIns-Rev 0~127 131 Insertion-to-Reverb Send Level
SendIns-Var 0~127 132 Insertion-to-Variation Send Level
InsDryLevel 0~127 133 Insertion Dry Level
Datalist/E 10/21/98 8:32 PM Page 29