Yamaha FS1R, Data List

Page: 30 / 44

30
Noise Gate
Range(Default) Param# Ctrl Dest Description
Attack *1~40(1) 108 I:Attack Time until when the gate begins to open (msec)
Release *10~680(140) 10A I:Release Time until the gate closes (msec)
Threshold *-72~-30(-45) 10C I:Threshold Input level at which the gate begins to open (dB)
OutputLevel *0~127(50) 10E I:Out Level Output level
Ins Pan L63~ C ~R63 130 Insertion Pan
SendIns-Rev 0~127 131 Insertion-to-Reverb Send Level
SendIns-Var 0~127 132 Insertion-to-Variation Send Level
InsDryLevel 0~127 133 Insertion Dry Level
Comp+Dist
Range(Default) Param# Ctrl Dest Description
Attack *1~40(7) 11E I:Attack Time until the compression takes effect (msec)
Release *10~680(25) 120 I:Release Time until the compression finishes (msec)
Threshold *-48~-6(-27) 122 I:Threshold Input level at which the compression takes effect (dB)
Ratio *1.0~20.0(7.0) 124 I:Ratio Ratio of compressed level to input level
Drive *0~127(60) 108 I:Drive Degree of distortion
EQ LowFreq *32~2.0k(250) 10A I:EQLowFreq EQ low frequency (Hz)
EQ Low Gain *-12~+12(+ 5) 10C I:EQLowGain EQ low gain (dB)
EQMidFreq *100~10.0k(4.0k) 114 I:EQMidFreq EQ middle frequency (Hz)
EQ Mid Gain *-12~+12(+ 8) 116 I:EQMidGain EQ middle gain (dB)
EQ Mid Q *1.0~12.0(1.0) 118 I:EQ Mid Q EQ middle Q
LPFCutoff *1.0k~18.0k,thru(9.0k) 10E I:LPFCutoff Frequency at which the low pass filter will cut the high range (Hz)
Edge *0~127(120) 11C I:Edge Sharpness of distorted sound
OutputLevel *0~127(70) 110 I:Out Level OutputLevel
Dry/Wet *D63>W,D=W,D<W63(D<W63) 11A I:Dry/Wet Balance between the dry sound and effect sound
Ins Pan L63~ C ~R63 130 Insertion Pan
SendIns-Rev 0~127 131 Insertion-to-Reverb Send Level
SendIns-Var 0~127 132 Insertion-to-Variation Send Level
InsDryLevel 0~127 133 Insertion Dry Level
Cmp+DS+Dly
Range(Default) Param# Ctrl Dest Description
Attack *1~40(7) 11C I:Attack Time until the compression takes effect (msec)
Release *10~680(140) 11E I:Release Time until the compression finishes (msec)
Threshold *-48~-6(-32) 120 I:Threshold Input level at which the compression takes effect (dB)
Ratio *1.0~20.0(7.0) 122 I:Ratio Ratio of compressed level to input level
Drive *0~127(60) 10E I:Drive Degree of distortion
OutputLevel *0~127(51) 110 I:Out Level OutputLevel
DS Low Gain *-12~+12(+ 4) 112 I:DSLowGain Gain with which the distortion will boost/cut the low range (dB)
DS Mid Gain *-12~+12(+ 8) 114 I:DSMidGain Gain with which the distortion will boost/cut the middle range (dB)
Delay 0.1~1365.0(190.0) 108 Delay time (msec)
FB Level *-63~+63(+ 8) 10A I:FB Level Feedback level
Delay Mix *0~127(38) 10C I:Delay Mix Depth of delay effect
Dry/Wet *D63>W,D=W,D<W63(D<W63) 11A I:Dry/Wet Balance between the dry sound and effect sound
Ins Pan L63~ C ~R63 130 Insertion Pan
SendIns-Rev 0~127 131 Insertion-to-Reverb Send Level
SendIns-Var 0~127 132 Insertion-to-Variation Send Level
InsDryLevel 0~127 133 Insertion Dry Level
Compressor
Range(Default) Param# Ctrl Dest Description
Attack *1~40(12) 108 I:Attack Time until when the compressor begins to take effect (msec)
Release *10~680(25) 10A I:Release Time until the compressor effect disappears (msec)
Threshold *-48~-6(-28) 10C I:Threshold Input level at which compression begins to be applied (dB)
Ratio *1.0~20.0(5.0) 10E I:Ratio Compression ratio of the compressor
OutputLevel *0~127(80) 110 I:Out Level Output level
Ins Pan L63~ C ~R63 130 Insertion Pan
SendIns-Rev 0~127 131 Insertion-to-Reverb Send Level
SendIns-Var 0~127 132 Insertion-to-Variation Send Level
InsDryLevel 0~127 133 Insertion Dry Level
Datalist/E 10/21/98 8:32 PM Page 30