Yamaha FS1R, Data List

Page: 23 / 44

23
Room Same parameters for Hall
Range(Default) Param# Description
ReverbTime 0.3~30.0(0.8) 68 Reverb length (sec)
Diffusion 0~10(10) 6A Spread of the reverb
InitDelay 0.1~200.0(25.3) 6C Delay time until the early reflections (msec)
HPF Cutoff thru,22~8.0k(32) 6E Frequency at which the high pass filter will cut the low range (Hz)
LPFCutoff 1.0k~18.0k,thru(5.6k) 70 Frequency at which the low pass filter will cut the high range (Hz)
Density 0~4(2) 7E Density of the reverberation
ER/Rev E63>R~E=R~E<R63(E=R) 100 Level balance of the early reflections and the reverberation
High Damp 0.1~1.0(0.8) 102 High range attenuation
(lower values cause the high range to decay faster)
FB Level -63~+63(+ 0) 104 Amount of feedback for the initial delay
Var Pan L63~ C ~R63 12C Variation Pan
Var Return 0~127 12D Variation Return Level
SendVar-Rev 0~127 12E Variation-to-Reverb Send Level
Stage Same parameters for Hall
Range(Default) Param# Description
ReverbTime 0.3~30.0(2.2) 68 Reverb length (sec)
Diffusion 0~10(10) 6A Spread of the reverb
InitDelay 0.1~200.0(25.3) 6C Delay time until the early reflections (msec)
HPF Cutoff thru,22~8.0k(45) 6E Frequency at which the high pass filter will cut the low range (Hz)
LPFCutoff 1.0k~18.0k,thru(10.0k) 70 Frequency at which the low pass filter will cut the high range (Hz)
Density 0~4(2) 7E Density of the reverberation
ER/Rev E63>R~E=R~E<R63(E=R) 100 Level balance of the early reflections and the reverberation
High Damp 0.1~1.0(0.6) 102 High range attenuation
(lower values cause the high range to decay faster)
FB Level -63~+63(+ 0) 104 Amount of feedback for the initial delay
Var Pan L63~ C ~R63 12C Variation Pan
Var Return 0~127 12D Variation Return Level
SendVar-Rev 0~127 12E Variation-to-Reverb Send Level
Plate Same parameters for Hall
Range(Default) Param# Description
ReverbTime 0.3~30.0(2.8) 68 Reverb length (sec)
Diffusion 0~10(10) 6A Spread of the reverb
InitDelay 0.1~200.0(9.5) 6C Delay time until the early reflections (msec)
HPF Cutoff thru,22~8.0k(50) 6E Frequency at which the high pass filter will cut the low range (Hz)
LPFCutoff 1.0k~18.0k,thru(5.6k) 70 Frequency at which the low pass filter will cut the high range (Hz)
Density 0~4(2) 7E Density of the reverberation
ER/Rev E63>R~E=R~E<R63(E=R) 100 Level balance of the early reflections and the reverberation
High Damp 0.1~1.0(0.5) 102 High range attenuation
(lower values cause the high range to decay faster)
FB Level -63~+63(+ 0) 104 Amount of feedback for the initial delay
Var Pan L63~ C ~R63 12C Variation Pan
Var Return 0~127 12D Variation Return Level
SendVar-Rev 0~127 12E Variation-to-Reverb Send Level
Datalist/E 10/21/98 8:32 PM Page 23