Components
19
EMU26092
Main switch
The main switch controls the ignition system;
its operation is described below.
“
”
(off)
With the main switch in the “
” (off) posi-
tion, the electrical circuits are off, and the key
can be removed.
“
”
(on)
With the main switch in the “
” (on) position,
the electrical circuits are on, and the key can-
not be removed.
“
”
(start)
With the main switch in the “
” (start) po-
sition, the starter motor turns to start the en-
gine. When the key is released, it returns
automatically to the “
” (on) position.
EMU32054
Power trim and tilt switch on remote
control
The power trim and tilt system adjusts the
outboard motor angle in relation to the tran-
som. Pushing the switch “
” (up) trims the
outboard motor up, and then tilts it up. Push-
ing the switch “
” (down) tilts the outboard
motor down and trims it down. When the
switch is released, the outboard motor will
stop in its current position. For instructions
on using the power trim and tilt switch, see
pages 50 and 52.
EMU26156
Power trim and tilt switch on bottom
cowling
The power trim and tilt switch is located on
the side of the bottom cowling. Pushing the
switch “
” (up) trims the outboard motor up,
and then tilts it up. Pushing the switch “
”
(down) tilts the outboard motor down and
1. Engine shut-off cord (lanyard)
2. Clip
3. Engine shut-off switch
ON
START
OFF
ON
START
OFF
1
2
3
ZMU05818
ON
OFF
START
ZMU04567
ON
OFF
START
ON
OFF
START
ZMU05821
UP
DN
ZMU03938
U6P27AE0.book Page 19 Friday, December 6, 2013 6:17 PM
