Yamaha FJR1300N 2001, Service Manual

Page: 38 / 617

1 - 27
GEN
INFO
FEATURES
Functions of components
Catalyst
Because the conditions in which NOx is generated are directly opposed to those of CO and HC,
there is a limit to the extent to which the concentration levels of these harmful elements can be
reduced in the combustion stage. Hence, the function of the catalyst is to clean the exhaust gas at a
high degree of efficiency by removing CO, HC, and NOx in the exhaust stage.
This model has adopted a monolith type metallic catalyst with a honeycomb construction, which
achieves a low exhaust resistance through the large surface area of the catalyst body (with a high
level of cleaning efficiency).
Catalytic substances consisting of precious metals such as platinum and rhodium are adhered to
the wall surface of these honeycomb cells, which are enclosed in the exhaust pipe. As the exhaust
gas comes in contact with these catalytic substances, the chemical reactions of oxidation and
reduction advance in order to clean the exhaust gas.
• The CO and HC oxidize with the oxidation function of platinum, and are converted into harmless
carbon dioxide (CO
2
) and water (H
2
O), resulting in cleaner exhaust gases.
• The NOx is reduced by the reduction function of rhodium, which converts NOx into harmless nitro-
gen (N
2
) and oxygen (O
2
), resulting in cleaner exhaust gases.
To clean the exhaust gases at a high rate of efficiency through the maximization of these catalytic
capacities, it is necessary to maintain and control the mixture in the vicinity of the stoichiometric air-
fuel ratio of (14.7:1) at all times. As a means of maintaining the stoichiometric ratio, this system has
adopted an O
2
feedback compensation method that uses an O
2
sensor, which will be described in
the next section.
Equipment Functions Main components
Three-way catalytic
converter system
Catalyzer (honeycomb
type) Simultaneously reduces
CO, HC, and NOx emis-
sions. • Catalytic converter
• Catalyst case
Air-fuel compensation
equipment Reduces CO, HC, and NOx
emissions. The catalyst pri-
marily cleans the exhaust
gases in order to ensure
the stoichiometric air-fuel
ratio. • O
2
sensor
• ECU
Fuel cut-off equipment Reduces CO and HC emis-
sions, improves fuel econ-
omy, and cuts off fuel
during deceleration. • Throttle position sensor
• ECU
CO + 1/2 O
2
CO
2
HC + O
2
CO
2
+ H
2
O
NOx N
2
+ O
2