Yamaha FJR1300N 2001, Service Manual

Page: 254 / 617

4 - 52
CHAS
CAUTION:
@
When installing the clutch hose onto the
clutch master cylinder, make sure the
clutch pipe touches the projection
a
as
shown.
NOTE:
Turn the handlebars to the left and to the right
to make sure the clutch hose does not touch
other parts (e.g., wire harness, cables, leads).
Correct if necessary.
3. Fill:
• clutch master cylinder reservoir
(with the specified amount of the recom-
mended clutch fluid)
WARNING
@
• Use only the designated clutch fluid.
Other clutch fluids may cause the rubber
seals to deteriorate, causing leakage and
poor clutch performance.
• Refill with the same type of clutch fluid
that is already in the system. Mixing
clutch fluids may result in a harmful
chemical reaction, leading to poor clutch
performance.
• When refilling, be careful that water does
not enter the clutch fluid reservoir. Water
will significantly lower the boiling point of
the clutch fluid and could cause vapor
lock.
CAUTION:
@
Clutch fluid may damage painted surfaces
or plastic parts. Therefore, always clean up
any spilt clutch fluid immediately.
Recommended clutch fluid
Brake fluid DOT 4
HYDRAULIC CLUTCH