PERIODIC MAINTENANCE AND ADJUSTMENT
7-15
7
TIP
_
The element should be wet but not
dripping.
_
7. Install the element into the filter
case.
8. Place the air filter case cover in its
original position, and then install
the bolts.
NOTICE:
Make sure
that each filter element is prop-
erly seated in its case. The en-
gine should never be operated
without the filter elements in-
stalled, otherwise the piston(s)
and/or cylinder(s) may become
excessively worn.
[ECA10531]
Cleaning the air filter caps and
check hose
1. Check each cap at the bottom of
the air filter case and the hose at
the bottom of the V-belt case for
accumulated dirt or water.
2. If dirt or water is visible, remove
the hose or caps from their clamp.
3. Drain dirt or water into a proper
container.
4. Install the air filter check hose or
caps to the original position.
TIP
_
The air filter check hose or caps need
more frequent cleaning after riding in
the rain, washing the vehicle, or in case
of overturn. If the check hose or caps
are clogged, have a Yamaha dealer
service the vehicle.
_
EAUU1210
Adjusting the throttle grip free
play
The throttle grip free play should mea-
sure 3.0–7.0 mm (0.12–0.28 in) as
shown. Periodically check the throttle
grip free play and, if necessary, adjust it
as follows.
1. Loosen the locknut.
Recommended oil:
Yamaha foam air filter oil or other
quality foam air filter oil
1. Throttle grip free play adjusting nut
2. Locknut
3. Throttle cable cover
C. Throttle grip free play
(a)
(b)
(c)
1
2
3
ZAUU1005
1YCF8199E0.book Page 15 Friday, March 22, 2013 8:34 AM
