Yamaha FINO AF115F Owner'S Manual Download

Page: 29 / 80

INSTRUMENT AND CONTROL FUNCTIONS

4-10

To close the seat

1. Fold the seat down, and then push

it down to lock it in place.

2. Remove the key from the main

switch if the motorcycle will be left
unattended.

TIP

Make sure that the seat is properly se-
cured before riding.

EAU37481

Helmet holders

The helmet holders are located under
the seat.

To secure a helmet to a helmet
holder

1. Open the seat. (See page 4-9.)
2. Attach a helmet to a helmet hold-

er, and then securely close the
seat.

WARNING! Never ride

with a helmet attached to the
helmet holder, since the helmet
may hit objects, causing loss
of control and possibly an acci-
dent.

[EWA10161]

To release a helmet from a helmet
holder

Open the seat, remove the helmet from
the helmet holder, and then close the
seat.

1. Helmet holder (

ZAUU0832

1YCF8199E0.book Page 10 Friday, March 22, 2013 8:34 AM

Summary of Contents for FINO AF115F

















































































Search results

Summary of Contents for FINO AF115F

Reviews:

Related manuals for FINO AF115F

Brands by name

Popular brands

Yamaha FINO AF115F, Owner'S Manual

Search results

Summary of Contents for FINO AF115F

Reviews:

Related manuals for FINO AF115F

Brands by name

Popular brands