PERIODIC MAINTENANCE AND ADJUSTMENT
7-8
7
To install the panel
Place the panel in the original position,
and then install the screws.
EAUU0510
Panel C
To remove the panel
1. Open the seat. (See page 4-9.)
2. Remove the bolts, and then pull
the grab bar off as shown.
3. Remove the screws, and then pull
the panel off as shown.
To install the panel
1. Place the panel in the original po-
sition, and then install the screws.
2. Place the grab bar in the original
position, and then install the bolts.
1. Panel B
2. Screw (
×
5)
ZAUU1003
2
1
2
2
ZAUU1004
1. Screw (
×
4)
2. Bolt (
×
5)
3. Grab bar
1
1
3
2
ZAUU1023
Tightening torque:
Grab bar bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
1YCF8199E0.book Page 8 Friday, March 22, 2013 8:34 AM