Operation
27
2.
Attach the engine stop switch lanyard to
a secure place on your clothing, or your
arm or leg. Then install the lock plate on
the other end of the lanyard into the en-
gine stop switch.
WARNING
EWM00120
●
Attach the engine stop switch lanyard to
a secure place on your clothing, or your
arm or leg while operating.
●
Do not attach the lanyard to clothing
that could tear loose. Do not route the
lanyard where it could become entan-
gled, preventing it from functioning.
●
Avoid accidentally pulling the lanyard
during normal operation. Loss of engine
power means the loss of most steering
control. Also, without engine power, the
boat could slow rapidly. This could
cause people and objects in the boat to
be thrown forward.
3.
Turn the main switch to “
” (on).
NOTE:
Dual engine users: When the main switch is
turned on, the buzzer operates for a few sec-
onds then stops automatically. The buzzer
also operates if one of the engines stalls.
4.
Turn the main switch to “
” (start),
and hold it for a maximum of 5 seconds.
5.
Immediately after the engine starts, re-
lease the main switch to return it to “
”
(on).
CAUTION:
ECM00191
●
Never turn the main switch to “
”
(start) while the engine is running.
●
Do not keep the starter motor turning for
more than 5 seconds. If the starter motor
is turned continuously for more than 5
seconds, the battery will be quickly dis-
charged, thus making it impossible to
ON
START
OFF
ZMU01881
U6D610E0.book Page 27 Tuesday, April 20, 2004 1:52 PM
Summary of Contents for F75D
