Components
27
TIP:
●
Steering movement is blocked when the
adjuster lever is set to the “A” position.
●
Check the tiller handle for smooth move-
ment when the lever is turned to the star-
board side “B”.
●
Do not apply lubricants such as grease to
the friction areas of the steering friction ad-
juster.
EMU26143
Power trim and tilt switch on remote
control or tiller handle
The power trim and tilt system adjusts the
outboard motor angle in relation to the tran-
som. Pressing the switch “
” (up) trims the
outboard motor up, and then tilts it up. Press-
ing the switch “
” (down) tilts the outboard
motor down and trims it down. When the
switch is released, the outboard motor will
stop in its current position.
For instructions on using the power trim and
tilt switch, see pages 63 and 65.
EMU26154
Power trim and tilt switch on bottom
cowling
The power trim and tilt switch is located on
the side of the bottom cowling. Pushing the
switch “
” (up) trims the outboard motor up,
and then tilts it up. Pushing the switch “
”
(down) tilts the outboard motor down and
trims it down. When the switch is released,
the outboard motor will stop in its current po-
sition.
1. Nut
Nut tightening torque:
3.8 Nm (0.38 kgf-m, 2.8 ft-lb)
UP
DN
ZMU03938
6C1-9-26-1E0.book 27 ページ ２０１０年２月１０日 水曜日 午後１時５３分
Summary of Contents for F50F
Page 13: ...General information 7 F70A 3 1 2 ZMU07077 6C1 9 26 1E0 book 7 ページ ２０１０年２月１０日 水曜日 午後１時５３分 ...
Page 86: ...Maintenance 80 F50FEHT F60CEHT ZMU05103 6C1 9 26 1E0 book 80 ページ ２０１０年２月１０日 水曜日 午後１時５３分 ...
Page 87: ...Maintenance 81 F70AET ZMU07089 6C1 9 26 1E0 book 81 ページ ２０１０年２月１０日 水曜日 午後１時５３分 ...
Page 109: ...6C1 9 26 1E0 book 103 ページ ２０１０年２月１０日 水曜日 午後１時５３分 ...
