Yamaha EAD10, Reference Manual

Page: 25 / 60

EAD10 Reference Manual (Advanced) 25
Trigger
This section explains the “Trigger” settings in the menu. Depending on the pad you have connected, different Trigger sig-
nals are generated when you strike the pad during the performance. The “Trigger” settings allow you to optimize Trig-
ger signals for each pad for processing by the Main Unit.
The settings are saved when the power is turned off.
Select the appropriate pad type when you connect the pad.
When you connect the pad to the [
q
KICK/
w
] jack and [
e
SNARE/
r
] jack, make sure to switch the Input Mode.
Input Mode
Trg1/ Trg2 : Trigger 1/ Trigger 2 Input Mode
Sets the [
q
KICK/
w
] jack to use the
q
KICK and
w
Trigger Inputs as a set or used separately.
Trg3/ Trg4 : Trigger 3/ Trigger 4 Input Mode
Sets whether the [
e
SNARE/
r
] jack
e
SNARE and
r
Trigger Inputs will be used as a set or used separately.
paired, separate
Settings Screen Structure
Trigger
Input Mode Input Mode Settings
Curve Curve Settings
Pad Type Pad Type Settings
Crosstalk Crosstalk Prevention Settings
FootSwSelect Foot Switch Select Settings
Trigger/Input Mode Input Mode Settings
Settings Screen Structure
Trigger
Input Mode
Trg1/Trg2 Trigger 1/Trigger 2 Input Mode
Trg3/Trg4 Trigger 3/Trigger 4 Input Mode
Sets how to use the mono × 2 input jack.
Select “paired” when using a drum trigger (DT50S) or similar device.
Settings
Tr
ig
g
e
r
Input Mode
Cur
v
e
Pa
d
T
y
p
e
Cr
osst
alk
F
ootS
w
Select
Trigger