MENU
EAD10 Reference Manual (Advanced)
18
Scene Edit
MessageType : Select MIDI Message Type
Sets the type of MIDI message to be sent when the pad is struck.
[For note]
Sends a MIDI note. Use this parameter to set the pad to produce a sound when struck.
Note : MIDI Note Output
Sets the MIDI note that is sent by the Trigger Input Source. Set the MIDI note number to be sent whenever a Trigger signal is
received from the specified Trigger Input Source. Settings are displayed as “Note number / Note name.”
MIDI Ch : MIDI Channel
Set which MIDI channel to use for sending out the MIDI message to play the Trigger Input Source.
GateTime : Gate Time
Sets the gate time (the time that passes between the output of MIDI Key On and Key Off messages) for the Trigger Input for each
Trigger Input Source.
TrgVel : Trigger Velocity
Sets the velocity value of the MIDI signal that is sent whenever a Trigger Input is received from a Trigger Input Source.
[For REVERB]
Controls the amount of Reverb (knob) according to how the pedal depressed or how hard the pad is struck. No sound is produced
even when the pad is struck.
MinValue : Minimum Value
Sets the amount (minimum) of Reverb applied when the pedal is released or when the pad is struck lightly.
MaxValue : Maximum Value
Sets the amount (maximum) of Reverb applied when the pedal is depressed fully or when the pad is struck hard.
Any setting other than note does not produce a sound when the pad is struck.
NOTE
note
variable
The velocity value reflects the strength with which the pad is struck.
1 to 127
MIDI notes are sent with Velocity at the fixed value, regardless of how hard or soft the pad is struck.
REVERB
