MENU
EAD10 Reference Manual (Advanced)
31
Trigger
Crosstalk
FootSwSelect
All Reject Lvl : All Rejection Level
Resolves crosstalk between the pad that is displayed at the upper right of the screen and all other pads.
While higher values are better at preventing crosstalk, they can also make it difficult to play other sounds at the same time.
Level: 0 to 99
Reject Lvl : Rejection Level (Source Pad)
Resolves crosstalk between the pad that is displayed at the upper right of the screen and other individual pads.
For example, in a case where Trg2 mistakenly produces a sound when hitting Trg1, set Trg2 to be displayed in the upper right of the screen,
place a check mark on Trg1, then raise the Reject Lvl.
While higher values are better at preventing crosstalk, they can also make it difficult to play other sounds at the same time.
Level: 0 to 99
Source Pad: Trg 1, Trg 2, Trg 3, Trg 4, Trg 5, Trg 6
FootSwSelect : Select Foot Switch
Choose from HH65 (hi-hat controller), FC3 (foot pedal), FC4/5 (foot pedal or foot switch), or FC7 (foot controller) for the controller con-
nected to the [FOOT SW] jack.
HH65, FC3, FC4/5, FC7
Trigger/Crosstalk Crosstalk Prevention Settings
Settings Screen Structure
The term “crosstalk” refers to the output of trigger signals from an electronic drum pad (including an acoustic drum with a drum trigger
attached) other than the one that was struck as a result of vibrations or interference between pads. Crosstalk is prevented by suppressing any
Trigger Signal sound that is lower than the specified value.
Settings
Settings
When the Input Mode is set to “paired,” Trg2 and Trg4 will not be set as the rejection source even when both are checked.
NOTE
Trigger/FootSwSelect Foot Switch Select Settings
Settings Screen Structure
Settings
