manualshive.com logo in svg

Yamaha DX200 Editor, Owner'S Manual

The Yamaha DX200 Editor is a powerful software tool designed to enhance your Yamaha DX200 synthesizer experience. With its user-friendly interface, this software allows you to conveniently edit and create sounds, rhythms, and patterns on your DX200. Download the free Owner's Manual now from manualshive.com for detailed instructions on maximizing your DX200's potential.

Share
Download
background image

57

Parameters / 

DX7 Edit Panel Window

•

[MEMORY PROTECT 1-32/65-96]/[MEMORY PROTECT 33-64/97-128] buttons

These buttons let you view and change the MEMORY PROTECT status.

• These are effective only when using the Store operation in the DX7 Edit Panel window.

• [OPERATOR SELECT] button

This button is used to select the desired operator (1-6) for editing in the Edit mode.  Each
successive click of the button steps through the available operators.  (If an operator is off,
it will be unavailable.)  The operator number is shown at the top right of the LCD for the
appropriate parameters.

Use this button when editing the following Edit parameters: 

Amplitude Modulation Sensitivity
Oscillator
Envelope Generator (EG)
Keyboard Level Scaling
Keyboard Rate Scaling
Operator

 (

Output Level

 and 

Velocity Sensitivity

)  

These parameters can all be edited independently for each of the operators.

• [EDIT/COMPARE] button

This button is used to select the 

Edit mode

 or the 

Compare

 function. 

• [MEMORY SELECT 1-32/33-64] buttons

These buttons are used to select the four pattern banks of the User patterns: 1-32/65-96
or 33-64/97-128.  Clicking either of these buttons also activates the 

Play mode

.

• [FUNCTION] button

This button is used to select the 

Function mode

, which lets you edit certain global param-

eters of the pattern or instrument (printed in yellow below the appropriate voice buttons).

• LED display

The LED window indicates the number of the selected pattern.  It also indicates whether
the original or edited pattern is active when using the 

Compare

 function.

• LCD display

The LCD window displays the current status of the DX200.  In the Play mode, it indicates
the selected pattern bank, and the selected pattern name and number.  In the Edit and
Function modes, it shows the selected parameter, function, or operation, along with the
relevant value(s) or setting(s).

Currently selected operator (Operator 6).

Summary of Contents for DX200 Editor



















































































Reviews:

No comments

Related manuals for DX200 Editor

Canon 70 MC - ZR70MC MiniDV Digital Camcorder Instruction Manual preview
70 MC - ZR70MC MiniDV Digital Camcorder
Brand: Canon Pages: 57
XenSource DL385 - ProLiant - G5 Manual preview
DL385 - ProLiant - G5
Brand: XenSource Pages: 313
DAVIS WeatherLink Addendum preview
WeatherLink
Brand: DAVIS Pages: 20
Olympus E-20 - Dual Monaural Earphones Software Installation Manual preview
E-20 - Dual Monaural Earphones
Brand: Olympus Pages: 2
SanDisk musicmatch User Manual preview
musicmatch
Brand: SanDisk Pages: 11
Novell DATA SYNCHRONIZER - UPDATE 1 Installation Manual preview
DATA SYNCHRONIZER - UPDATE 1
Brand: Novell Pages: 9
Novell OPEN WORKGROUP SUITE SMALL BUSINESS EDITION 9.3 - ADMINISTRATION 10-2007 Manual preview
OPEN WORKGROUP SUITE SMALL BUSINESS EDITION 9.3 - ADMINISTRATION 10-2007
Brand: Novell Pages: 30
Symantec WISE LINUX PACKAGE EDITOR 8.0 Reference preview
WISE LINUX PACKAGE EDITOR 8.0
Brand: Symantec Pages: 69
SkyLink AD-106 User Instruction preview
AD-106
Brand: SkyLink Pages: 6
FieldServer FS-8700-40 Driver Manual preview
FS-8700-40
Brand: FieldServer Pages: 34
Picsel CLIE PEG-NZ90 Support Manual preview
CLIE PEG-NZ90
Brand: Picsel Pages: 8
TC Electronic VoiceStrip Manual preview
VoiceStrip
Brand: TC Electronic Pages: 8
Lenovo ThinkCentre M70e Hardware Maintenance Manual preview
ThinkCentre M70e
Brand: Lenovo Pages: 408
Garmin Nuvi 755T - Automotive GPS Receiver Owner'S Manual Supplement preview
Nuvi 755T - Automotive GPS Receiver
Brand: Garmin Pages: 61
ASCOM TEMS VISUALIZATION 7.1 ENTERPRISE Datasheet preview
TEMS VISUALIZATION 7.1 ENTERPRISE
Brand: ASCOM Pages: 8
Belkin RESEAU EN MODE AD HOC WIFI-SANS INTERNET (French) Mode D'Emploi preview
RESEAU EN MODE AD HOC WIFI-SANS INTERNET
Brand: Belkin Pages: 11
Marathon FTvirtual IBM BladeCenter Installation And Configuration Manual preview
FTvirtual IBM BladeCenter
Brand: Marathon Pages: 50
Voyetra Turtle Beach teach Me Piano Deluxe User Manual preview
teach Me Piano Deluxe
Brand: Voyetra Turtle Beach Pages: 50

Brands by name

Popular brands

Load more brands