Yamaha DX200 Editor Owner'S Manual Download Page 38 | Manualshive

Page: 38 / 82

background image

38

Parameters /

DX200 Editor Main Window

About Operator On/Off Controls

Each operator can be independently turned on and off during editing --- an important
tool in hearing the effects of your edits. For example, you may want to temporarily
mute one carrier operator to better hear the edits you are making on another carrier.
Or you may want to turn an operator alternately on and off to hear how its presence
and absence affects the overall sound.

Click the appropriate "OP No." (Operator Number) button (1 - 6). When an operator is
off, all its parameters are ghosted.

Keep in mind that Operator On/Off is used only temporarily in editing and the on/off sta-
tus is not saved with the pattern. To actually turn an operator off, set its

to

"0."

• Operator Key Velocity Sensitivity

Range: 0 ... 7

This determines the touch sensitivity of an operator, or how its level responds to your
playing strength.  When Velocity Sensitivity is set to a value other than "0," the harder you
play a key, the greater the level of the corresponding operator.  The softer you play a key,
the lower the level.  When this is set to "0," the operator level remains the same, no mat-
ter how softly or strongly you play the key. Higher values give you greater dynamic range
between low and high levels. Setting this to an appropriate value for a carrier operator
gives you touch control over volume; setting it for a modulator gives you touch control
over timbre.

The numbers in the top row indicate the operators' on/off status:
"1" for on, "0" for off. In this example, operator 3 is off.

«
...
36
37
38
39
40
...
»

Summary of Contents for DX200 Editor



















































































Reviews:

No comments

Related manuals for DX200 Editor

MOBILE SECURITY FOR WINDOWS MOBILE -

Brand: F-SECURE Pages: 4

MOBILE SECURITY FOR UIQ -

Brand: F-SECURE Pages: 3

MOBILE SECURITY 6 FOR WINDOWS MOBILE -

Brand: F-SECURE Pages: 5

MOBILE SECURITY 6 FOR S60 -

Brand: F-SECURE Pages: 5

CLIENT SECURITY 7.00

Brand: F-SECURE Pages: 315

ANTI-VIRUS FOR MICROSOFT EXCHANGE 9.00

Brand: F-SECURE Pages: 115

ANTI-VIRUS FOR MICROSOFT EXCHANGE 8.00 -

Brand: F-SECURE Pages: 349

ANTI-VIRUS - FOR MICROSOFT EXCHANGE

Brand: F-SECURE Pages: 224

CRESTRON-APP-SSTV

Brand: Crestron Pages: 28

Codian Remote Management API

Brand: TANDBERG Pages: 66

SADPmini Logger

Brand: Alpha Moisture Systems Pages: 14

G2 PORTABLE HX-MU025DC

Brand: Samsung Pages: 1

Brand: Samsung Pages: 14

Brand: SAP Pages: 31

Brand: Planet Pages: 55

Brand: Cabletron Systems Pages: 495

MOTIF6 Voice Editor

Brand: Yamaha Pages: 33

ANTI-VIRUS 5.6 - FOR MICROSOFT ISA SERVER 2004-2006 STANDARD...

Brand: KAPERSKY Pages: 75

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands