61
DTXTREME
Ⅲ
43. Factory Set
[Test Code]
A0 2B 00
[Initial indication]
[Test contents]
Executes Factory Set.
[Test method]
Press the [ENTER/STORE] button to execute the test.
“OK” will be displayed when the test is
fi
nished.
[Check item]
Check the test result indicated on the LCD.
[Judgment indication]
None
[MIDI code output for judgment result]
OK:
A0 2B 02
NG:
A0 2B 03
(When the [EXIT] button is pressed during the test)
[How to quit test]
MANUAL MODE:
In case of OK, press the [INC/YES] button to proceed to the
next test.
MIDI MODE:
Send a test code for another test to stop the current test and
the test for the newly sent test code will be executed.
CAUTION
・
If the Factory Set is executed, the user memory
data will be replaced by the initial setting at the time
of shipment. Take care not to lose important data.
Store necessary setup data to USB memory or the
like in advance. (Page 83)
44. Exit
[Test Code]
A0 2C 00
[Initial indication]
/ / / / DTXTREME III Test Program / / / /
43 : FactorySet
: Press [ENTER]
[Test contents]
Finishes the test program mode and resets to the normal
operation mode.
[Test method]
Press the [ENTER/STORE] button to execute the test.
Press the [INC/YES] button in the test mode to start the normal
operation mode.
[Check item]
Check that the normal operation mode starts.
After the normal operation mode is started, turn the sliders (slide
volumes) [MASTER] and [PHONES] to the maximum and
check the noise level meets the following requirements.
Do not insert a plug to the [AUX IN/SAMPLING IN] jack.
[OUTPUT L/MONO]:
-90 dBu or less (load of 10 k
Ω
)
[OUTPUT R]:
-90 dBu or less (load of 10 k
Ω
)
[INDIVIDUAL OUTPUT 1
̶
6]:
-88 dBu or less (load of 10 k
Ω
)
[PHONES] Lch:
-90 dBu or less (load of 33
Ω
)
[PHONES] Rch:
-90 dBu or less (load of 33
Ω
)
Cycle the power to the DTXTREME
Ⅲ
and check that the click
noise meets the following requirements when the power is
turned on/off with the sliders (slide volumes) [MASTER] and
[PHONES] set to the maximum.
[OUTPUT L/MONO]:
500 mVpp or less (load of 10 k
Ω
)
[OUTPUT R]:
500 mVpp or less (load of 10 k
Ω
)
[INDIVIDUAL OUTPUT 1
̶
6]: 500 mVpp or less (load of 10 k
Ω
)
[PHONES] Lch:
800 mVpp or less (load of 33
Ω
)
[PHONES] Rch:
800 mVpp or less (load of 33
Ω
)
[Judgment indication]
None
[MIDI code output for judgment result]
None
/ / / / DTXTREME III Test Program / / / /
44 : Exit
: Press [ENTER]
Summary of Contents for DTXTREME III
