Yamaha DIVERSION F 2010 Owner'S Manual Download Page 85

Page: 85 / 102

PERIODIC MAINTENANCE AND ADJUSTMENT

6-40

EAU39020

Auxiliary light bulb

If the auxiliary light does not come on,
have a Yamaha dealer check the elec-
trical circuit or replace the bulb.

EAU44790

Front wheel (XJ6F)

WARNING

EWA14840

For the ABS model, have a Yamaha
dealer remove and install the wheel.

EAU42642

To remove the front wheel

WARNING

EWA10821

To avoid injury, securely support the
vehicle so there is no danger of it
falling over.

1. Loosen the front wheel axle pinch

bolt, then the wheel axle and the
brake caliper bolts.

2. Place the vehicle on the center-

stand.

3. Remove the brake caliper on each

side by removing the bolts.

NOTICE:

Do not apply the brake

after the brake calipers have
been removed, otherwise the
brake pads will be forced shut.

[ECA11051]

4. Pull the wheel axle out, and then

remove the wheel.

EAU48660

To install the front wheel

1. Lift the wheel up between the fork

legs.

2. Insert the wheel axle.

1. Auxiliary light bulb

1. Front wheel axle pinch bolt

2. Wheel axle

3. Brake caliper bolt

1. Brake caliper
2. Brake caliper bolt

U1CWE1E0.book Page 40 Thursday, July 15, 2010 11:42 AM

Summary of Contents for DIVERSION F 2010







































































































Search results

Summary of Contents for DIVERSION F 2010

Reviews:

Related manuals for DIVERSION F 2010

Brands by name

Popular brands

Yamaha DIVERSION F 2010, Owner'S Manual

Search results

Summary of Contents for DIVERSION F 2010

Reviews:

Related manuals for DIVERSION F 2010

Brands by name

Popular brands