Yamaha DIVERSION F 2010 Owner'S Manual Download Page 70 | Manualshive

Page: 70 / 102

background image

PERIODIC MAINTENANCE AND ADJUSTMENT

6-25

6

EAU22273

Brake light switches (XJ6F)

The brake light, which is activated by
the brake pedal and brake lever, should
come on just before braking takes ef-
fect. If necessary, adjust the rear brake
light switch as follows, but the front
brake light switch should be adjusted
by a Yamaha dealer.
Turn the rear brake light switch adjust-
ing nut while holding the rear brake light
switch in place. To make the brake light
come on earlier, turn the adjusting nut
in direction (a). To make the brake light
come on later, turn the adjusting nut in
direction (b).

EAU36503

Brake light switches (XJ6FA)

The brake light, which is activated by
the brake pedal and brake lever, should
come on just before braking takes ef-
fect. If necessary, have a Yamaha deal-
er adjust the brake light switches.

EAU22392

Checking the front and rear
brake pads

The front and rear brake pads must be
checked for wear at the intervals spec-
ified in the periodic maintenance and
lubrication chart.

EAU22420

Front brake pads

Each front brake pad is provided with a
wear indicator groove, which allows
you to check the brake pad wear with-
out having to disassemble the brake.
To check the brake pad wear, check
the wear indicator groove. If a brake
pad has worn to the point that the wear

1. Rear brake light switch

2. Rear brake light switch adjusting nut

1

2

(a)

(b)

1. Brake pad wear indicator groove

1

1

U1CWE1E0.book Page 25 Thursday, July 15, 2010 11:42 AM

«
...
68
69
70
71
72
...
»

Summary of Contents for DIVERSION F 2010







































































































Reviews:

No comments

Related manuals for DIVERSION F 2010

Indian eFTR Mini 2021

Brand: Razor Pages: 20

Brand: ICON Pages: 2

Power commander GSXR750

Brand: Dynojet Pages: 4

Brand: R&G Pages: 10

Brand: Suzuki Pages: 230

Brand: Paaschburg & Wunderlich Pages: 2

Brand: Honda Pages: 61

Brand: hepco & becker Pages: 2

Brand: hepco & becker Pages: 3

Brand: Wunderlich Pages: 2

Brand: Ossa Pages: 72

Brand: VESPA Pages: 25

Metric Cruiser Seats

Brand: Saddlemen Pages: 3

CIAK MASTER 50-4T

Brand: Malaguti Pages: 31

Brand: HYOSUNG Pages: 262

Brand: Yamaha Pages: 32

Brand: Yamaha Pages: 98

Brand: Yamaha Pages: 114

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands