background image

INSTRUMENT AND CONTROL FUNCTIONS

3-15

3

even slightly applied, a vibration
can be felt at the lever and pedal,
but these do not indicate a mal-
function.

When the ABS is activated, the
brakes are operated in the usual
way. A pulsating action may be felt
at the brake lever or brake pedal,
but this does not indicate a mal-
function.

This ABS has a test mode which
allows the owner to experience the
pulsating at the brake lever or
brake pedal when the ABS is oper-
ating. However, special tools are
required, so please consult your
Yamaha dealer when performing
this test.

NOTICE

ECA16120

Keep any type of magnets (including
magnetic pick-up tools, magnetic
screwdrivers, etc.) away from the
front and rear wheel hubs, otherwise
the magnetic rotors equipped in the
wheel hubs may be damaged, result-
ing in improper performance of the
ABS system.

EAU13074

Fuel tank cap 

To open the fuel tank cap

Open the fuel tank cap lock cover, in-
sert the key into the lock, and then turn
it 1/4 turn clockwise. The lock will be re-
leased and the fuel tank cap can be
opened.

To close the fuel tank cap

1. Push the fuel tank cap into position

with the key inserted in the lock.

2. Turn the key counterclockwise to

the original position, remove it, and
then close the lock cover.

1. Rear wheel hub
2. Front wheel hub

1

2

1. Fuel tank cap lock cover

2. Unlock.

U1CWE1E0.book  Page 15  Thursday, July 15, 2010  11:42 AM

Summary of Contents for DIVERSION F 2010







































































































Reviews: