Yamaha DIVERSION F 2010 Owner'S Manual Download Page 84

Page: 84 / 102

PERIODIC MAINTENANCE AND ADJUSTMENT

6-39

EAU24204

Replacing a turn signal light
bulb

1. Remove the turn signal light lens

by removing the screw.

2. Remove the burnt-out bulb by

pushing it in and turning it counter-
clockwise.

3. Insert a new bulb into the socket,

push it in, and then turn it clock-
wise until it stops.

4. Install the lens by installing the

screw.

NOTICE:

Do not over-

tighten the screw, otherwise the
lens may break.

[ECA11191]

EAU24313

Replacing the license plate
light bulb

1. Remove the license plate light unit

by removing the screws.

2. Remove the license plate light bulb

socket (together with the bulb) by
pulling it out.

3. Remove the burnt-out bulb by pull-

ing it out.

4. Insert a new bulb into the socket.
5. Install the socket (together with the

bulb) by pushing it in.

6. Install the license plate light unit by

installing the screws.

1. Turn signal light lens

2. Screw

1. License plate light unit

2. Screw

1. License plate light bulb socket
2. License plate light bulb

U1CWE1E0.book Page 39 Thursday, July 15, 2010 11:42 AM

Summary of Contents for DIVERSION F 2010







































































































Search results

Summary of Contents for DIVERSION F 2010

Reviews:

Related manuals for DIVERSION F 2010

Brands by name

Popular brands

Yamaha DIVERSION F 2010, Owner'S Manual

Search results

Summary of Contents for DIVERSION F 2010

Reviews:

Related manuals for DIVERSION F 2010

Brands by name

Popular brands