Yamaha DIVERSION F 2010 Owner'S Manual Download Page 79 | Manualshive

Page: 79 / 102

background image

PERIODIC MAINTENANCE AND ADJUSTMENT

6-34

6

EAU50290

Battery

The battery is located under the seat.
(See page 3-18.)
This model is equipped with a VRLA
(Valve Regulated Lead Acid) battery.
There is no need to check the electro-
lyte or to add distilled water. However,
the battery lead connections need to be
checked and, if necessary, tightened.

WARNING

EWA10760

●

Electrolyte is poisonous and
dangerous since it contains sul-
furic acid, which causes severe

burns. Avoid any contact with
skin, eyes or clothing and al-
ways shield your eyes when
working near batteries. In case
of contact, administer the fol-
lowing FIRST AID.

• EXTERNAL: Flush with plenty

of water.

• INTERNAL: Drink large quan-

tities of water or milk and im-
mediately call a physician.

• EYES: Flush with water for 15

minutes and seek prompt
medical attention.

●

Batteries produce explosive hy-
drogen gas. Therefore, keep
sparks, flames, cigarettes, etc.,
away from the battery and pro-
vide sufficient ventilation when
charging it in an enclosed
space.

●

KEEP THIS AND ALL BATTER-
IES OUT OF THE REACH OF
CHILDREN.

To charge the battery

Have a Yamaha dealer charge the bat-
tery as soon as possible if it seems to
have discharged. Keep in mind that the

battery tends to discharge more quickly
if the vehicle is equipped with optional
electrical accessories.

NOTICE

ECA16521

To charge a VRLA (Valve Regulated
Lead Acid) battery, a special (con-
stant-voltage) battery charger is re-
quired. Using a conventional battery
charger will damage the battery.

To store the battery

1. If the vehicle will not be used for

more than one month, remove the
battery, fully charge it, and then
place it in a cool, dry place.

NOTICE:

When removing the

battery, be sure the key is
turned to “OFF”, then discon-
nect the negative lead before
disconnecting the positive lead.

[ECA16302]

2. If the battery will be stored for more

than two months, check it at least
once a month and fully charge it if
necessary.

3. Fully charge the battery before in-

stallation.

NOTICE:

When install-

ing the battery, be sure the key

1. Battery band

2. Battery cover

3. Negative battery lead (black)
4. Positive battery lead (red)

2

1

3

4

U1CWE1E0.book Page 34 Thursday, July 15, 2010 11:42 AM

«
...
77
78
79
80
81
...
»

Summary of Contents for DIVERSION F 2010







































































































Reviews:

No comments

Related manuals for DIVERSION F 2010

Brand: Öhlins Pages: 8

PAMPERA 400 - 2006

Brand: GAS GAS Pages: 70

Brand: Yamaha Pages: 96

Brand: R&G Pages: 10

690 Enduro R 2013

Brand: KTM Pages: 234

2005-2006 Hammer

Brand: Victory Motorcycles Pages: 12

Brand: Yoshimura Pages: 3

Brand: Sharper Image Pages: 4

Brand: Memphis Shades Pages: 2

Brand: Suzuki Pages: 42

Brand: SCA Pages: 5

Brand: Yamaha Pages: 108

Brand: Yamaha Pages: 118

Brand: Yamaha Pages: 110

Brand: Yamaha Pages: 120

Brand: Yamaha Pages: 216

Brand: Yamaha Pages: 380

Brand: Yamaha Pages: 658

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands