Yamaha DIVERSION F 2010 Owner'S Manual Download Page 21

Page: 21 / 102

INSTRUMENT AND CONTROL FUNCTIONS

3-6

Display

Conditions

What to do

Under 39 °C

(Under 103 °F)

Message “Lo” is displayed.

OK. Go ahead with riding.

40–116 °C

(104–242 °F)

Coolant temperature is dis-
played.

OK. Go ahead with riding.

117–134 °C

(243–274 °F)

Coolant temperature flashes.
Warning light comes on.

Stop the vehicle and allow it to idle until
the coolant temperature goes down.
If the temperature does not go down,
stop the engine. (See page 6-44.)

Above 135 °C

(Above 275 °F)

Message “HI” flashes.
Warning light comes on.

Stop the engine and allow it to cool.
(See page 6-44.)

ABS

U1CWE1E0.book Page 6 Thursday, July 15, 2010 11:42 AM

Summary of Contents for DIVERSION F 2010







































































































Search results

Summary of Contents for DIVERSION F 2010

Reviews:

Related manuals for DIVERSION F 2010

Brands by name

Popular brands

Yamaha DIVERSION F 2010, Owner'S Manual

Search results

Summary of Contents for DIVERSION F 2010

Reviews:

Related manuals for DIVERSION F 2010

Brands by name

Popular brands