Yamaha disklavier Mark IV Series Operating Manual Download Page 70

Page: 70 / 76

CHAPTER 4: Recording

A song that you play on the Disklavier and the audio
input from the MIC/LINE IN jack can be recorded in the
[User Library] as audio data (WAVE file).

Recording a Song as Audio
Data

Tap on

in the [Main] Screen.

Select the desired album in the list
that appears.

Tap on

To cancel the recording of the internal
voice of the tone generator

Tap on

To switch the speaker output on and off
when recording

Tap on

repeatedly until the

following screen appears.

Tap on [Speaker], and press

to switch between

[ON] and [OFF].

Tap on [Voice], and then the desired
voice. (

→

pg. 49)

Tap on

, and then adjust

the volume in [TG] and [MIC]. (

→

pg. 27)

Volume bar (MIC)

Adjusted value

Tap to exit.

Volume bar (TG)

AdvancedManual.book Page 55 Friday, May 23, 2008 11:45 AM

Summary of Contents for disklavier Mark IV Series













































































Search results

Summary of Contents for disklavier Mark IV Series

Reviews:

Related manuals for disklavier Mark IV Series

Brands by name

Popular brands

Yamaha disklavier Mark IV Series, Operating Manual

Search results

Summary of Contents for disklavier Mark IV Series

Reviews:

Related manuals for disklavier Mark IV Series

Brands by name

Popular brands