CHAPTER 1: Getting Started
17
Adding Your City to the [Time Zone] Drop
Down List
1
Tap on
.
2
Tap on the time zone to be replaced with your desired
city.
3
Tap on your country, and then on your city in the list.
4
Tap on
on the “Select City” title bar.
To correct the city selection,
tap on
, and then perform step
2
thru
4
again.
Changing the Battery Charge Mode
You can change the battery charge mode for the Pocket
Controller, according to its usage condition.
[High]:
Select this to charge the battery fully
anytime to use it for the long period of
time.
[Medium]:
Select this to charge the battery only when
its capacity is less than 70%. This is the
default charge mode.
[Low]:
Select this to charge the battery only when
its capacity is less than 50%. This mode
will prolong the battery life.
1
Tap on
[Battery Charge] in the [PRC-100 Menu]
screen.
2
Tap on the desired mode.
3
Tap on
.
The [PRC-100 Menu] screen resumes.
Rebooting the Pocket Controller
When a problem occurs, first see the “Troubleshooting”
on page 96. If the problem persist, follow the procedure
below.
1
Tap on
on the task bar.
2
Tap on [Reboot] on the menu that appears.
3
Tap on [Hour]/[Minutes] to set the
time.
4
Tap on [Time format] , and then
select the desired format.
5
Tap on , and then on [AM] or [PM],
if necessary.
6
Tap on the [Date] button, and then
tap on current date on the mini-
calendar that appears.
7
Tap on [Weeks start on] ,
and
then
tap on [Sunday] or [Monday] that is to
be shown as the first day of the week
in the mini-calendar.
8
Tap on [Date format] , and then on
the desired format.
9
Tap on
on the title bar.
The [PRC-100 Menu] screen resumes.
10
Reboot the Pocket Controller.
(
→
“Rebooting the Pocket Controller” below)
AdvancedManual.book Page 17 Friday, May 23, 2008 11:45 AM
Summary of Contents for disklavier Mark IV Series
Page 1: ......
Page 10: ...English ...
