Yamaha disklavier Mark IV Series Operating Manual Download Page 71

Page: 71 / 76

CHAPTER 4: Recording

Continue to next page...

Englis

Note:

You can record a song as audio data only when

making a new recording.

Note:

Metronome Mode recording (

→

pg. 52) and

changing the default tempo (

→

pg. 54) are not available

with this recording method.

Press

start

recording, and

then start playing the Disklavier.

Recording starts.

Press

to stop recording.

To play back the recorded song,

press .

[Audio Recording]
icon

You can record your piano performance as MIDI data and
the audio input from the MIC/LINE IN jack as audio
(WAVE file) data simultaneously.

Recording a Song as MIDI
and Audio Data

Tap on

in the [Main] Screen.

Select the desired album in the list
that appears.

Tap on

AdvancedManual.book Page 56 Friday, May 23, 2008 11:45 AM

Summary of Contents for disklavier Mark IV Series













































































Search results

Summary of Contents for disklavier Mark IV Series

Reviews:

Related manuals for disklavier Mark IV Series

Brands by name

Popular brands

Yamaha disklavier Mark IV Series, Operating Manual

Search results

Summary of Contents for disklavier Mark IV Series

Reviews:

Related manuals for disklavier Mark IV Series

Brands by name

Popular brands