Yamaha disklavier Mark IV Series Operating Manual Download Page 46

Page: 46 / 76

CHAPTER 2: Song Playback Features

Tap on the desired edit track option
button (

, or
).

Destination track
button

Tap to cancel editing.

[Mix Track] screen

[Move Track] screen

[Copy Track] screen

Tap on the destination track button.

The destination track selection screen appears.

Tap on the destination track number.

[Mix Track]:

The track selected in step

will be mixed with

the destination track.

[Move Track]:

The destination track will be overwritten by the
track selected in step

(the selected track will

be blank).

[Copy Track]:

The destination track will be overwritten by the
track selected in step

(the selected track will

be retained).

Confirm that the destination track
number is marked with a blue square,
and then tap on

Tap on

after the completion

message appears.

Tap to cancel selection.

AdvancedManual.book Page 31 Friday, May 23, 2008 11:45 AM

Summary of Contents for disklavier Mark IV Series













































































Search results

Summary of Contents for disklavier Mark IV Series

Reviews:

Related manuals for disklavier Mark IV Series

Brands by name

Popular brands

Yamaha disklavier Mark IV Series, Operating Manual

Search results

Summary of Contents for disklavier Mark IV Series

Reviews:

Related manuals for disklavier Mark IV Series

Brands by name

Popular brands