manualshive.com logo in svg

Yamaha D24, Owner'S Manual

The Yamaha D24 Owner's Manual is a comprehensive guide that provides detailed instructions for operating and maximizing the performance of your Yamaha D24 product. Easily downloadable for free from manualshive.com, this manual equips you with all the necessary information to unlock the full potential of your device.

Share
Download
background image

104

Chapter 10—Editing Parts

D24—Owner’s Manual

Erasing Parts

The Part Erase function is used to erase part of a track. The erased part is left empty.

The following points, which can be adjusted in sub-frame steps, can be selected when 
specifying edit points: LAST REC IN, LAST REC OUT, A, B, or a locate memory from 
1 through 99. Note that you must set these points before entering the Part Erase func-
tion. See the Quick Locate Chapter on page 57 for more information about setting 
these points.

1

Press the [EDIT] button.

The EDIT indicator lights up.

2

Use the JOG/DATA dial to select “PART EDIT,” and then press the [ENTER] but-
ton.

3

Use the JOG/DATA dial to select “ERASE,” and then press the [ENTER] button.

“PART ERASE—TR nn” appears on the display (“nn” being the number of the track 
from which the part is to be erased).

4

Use the JOG/DATA dial to select the track.

You can select individual tracks, track pairs, or all tracks: 1–8, 1/2–7/8, or ALL. To erase 
part of a virtual track, assign it to a main track first, and then erase.

5

Press the [ENTER] button.

“ERS TR nn—ST MARK IN” appears on the display (“nn” being the number of the 
selected track and “ST” being the start point of the part to be erased).

6

Use the JOG/DATA dial to select one of the following points: MARK IN, MARK 
OUT, MARK A, MARK B, or a locate memory from 1 through 99.

7

Press the [ENTER] button.

“ERS TR nn—ST 00:00:00.00.0” appears on the display (“00:00:00.00.0” being the 
position of the selected point).

8

Use the JOG/DATA dial or keypad to adjust the start position, and then press 
the [ENTER] button.

“ERS TR nn—ED MARK IN” appears on the display (“ED” being the end point of the 
part to be erased).

9

Use the JOG/DATA dial to select one of the following points: MARK IN, MARK 
OUT, MARK A, MARK B, or a locate memory from 1 through 99.

10

Press the [ENTER] button.

If the duration of the specified part is less than 15 milliseconds, the minimum size, the 
message “TOO SHORT” appears.

“ERS TR nn—ED 00:00:00.00.0” appears on the display (“00:00:00.00.0” being the 
position of the selected point).

11

Use the JOG/DATA dial or keypad to adjust the end position, and then press 
the [ENTER] button.

“EDIT ERASE—ARE YOU SURE” appears on the display.

Summary of Contents for D24




















































































































































































































Reviews:

No comments

Related manuals for D24

FagronLab FG User Manual preview
FG
Brand: FagronLab Pages: 16
Cadman 6010 Operator And Maintenance Manual preview
6010
Brand: Cadman Pages: 66
Abbott CentriMag Quick Reference Manual preview
CentriMag
Brand: Abbott Pages: 2
Abbott FreeStyle Libre Software Update preview
FreeStyle Libre
Brand: Abbott Pages: 3
abc PHASER Operation And Maintenance Manual preview
PHASER
Brand: abc Pages: 8
Raymarine H6 System Installation Manual preview
H6
Brand: Raymarine Pages: 124
Raymarine H6 Owner'S Manual preview
H6
Brand: Raymarine Pages: 192
LANGER EMV-Technik P1401 User Manual preview
P1401
Brand: LANGER EMV-Technik Pages: 25
Lang Electric Clamshell CSE12-208VCD Installation, Operation And Maintenance Instructions preview
Electric Clamshell CSE12-208VCD
Brand: Lang Pages: 16
Nautilus 9NP-B7524 Series Owner'S Instructions preview
9NP-B7524 Series
Brand: Nautilus Pages: 2
Nautilus Be strong NS 700X Owner'S Manual preview
Be strong NS 700X
Brand: Nautilus Pages: 34
Nautilus BE STRONG E916 Quick Start Manual preview
BE STRONG E916
Brand: Nautilus Pages: 21
Velleman K4401 Illustrated Assembly Manual preview
K4401
Brand: Velleman Pages: 16
Velleman VTTEST11 Manual preview
VTTEST11
Brand: Velleman Pages: 11
Baileigh Industrial AP-0 Operating Instructions And Parts Manual preview
AP-0
Brand: Baileigh Industrial Pages: 12
Garmin VHF 200 Series Quick Reference Manual preview
VHF 200 Series
Brand: Garmin Pages: 2
Parker AC20 Series Technical Manual preview
AC20 Series
Brand: Parker Pages: 58
W&H Implantmed SI-1010 Quick Manual preview
Implantmed SI-1010
Brand: W&H Pages: 2

Brands by name

Popular brands

Load more brands