manualshive.com logo in svg

Yamaha D24, Owner'S Manual, Page: 109 / 211

Share
Download
Yamaha D24 Owner'S Manual Download Page 109

Erasing Parts

105

D24—Owner’s Manual

12

Press the [ENTER] button to erase the specified part, or the [CANCEL] button 
to cancel.

The part is erased.

When the erase operation is complete, “FINISHED” appears on the display and the 
UNDO/REDO indicator lights up, indicating that it can be undone. See “Undoing a 
Recording or Edit” on page 35 for more information.

To erase another part, press the [ENTER] button to return to step 4.

13

Press the [EDIT] button to leave edit.

The EDIT indicator goes out.

In the following example, the part between the ST and ED points on track 2 is erased.

When a part is erased, although it can no longer be accessed, its sound files remain on 
disk as unused files, taking up disk space, and reducing the time remaining for addi-
tional recording. To delete these unused files and recover the disk space, use the Opti-
mize function. See “Recovering Disk Space” on page 172 for more information.

ST point

00:01:00.00

TR 2: Before

ED point

00:01:15.00

TR 2: After

Part erased

Summary of Contents for D24




















































































































































































































Reviews:

No comments