manualshive.com logo in svg

Yamaha D24, Owner'S Manual, Page: 111 / 211

Share
Download
Yamaha D24 Owner'S Manual Download Page 111

Inserting Parts

107

D24—Owner’s Manual

12

Press the [ENTER] button to insert the specified part, or the [CANCEL] button 
to cancel.

An empty part is inserted into the specified track and existing material is moved back-
ward.

When the insert space operation is complete, “FINISHED” appears on the display and 
the UNDO/REDO indicator lights up, indicating that it can be undone. See “Undoing 
a Recording or Edit” on page 35 for more information.

To insert a part into another track, press the [ENTER] button to return to step 4.

13

Press the [EDIT] button to leave edit.

The EDIT indicator goes out.

In the following example, an empty part is inserted into track 2 between the ST and ED 
points and the existing material is moved backward.

ST point

00:01:00.00

TR 2: Before

ED point

00:01:15.00

TR 2: After

Existing material moved backward

Empty part inserted

Summary of Contents for D24




















































































































































































































Reviews:

No comments