manualshive.com logo in svg

Yamaha D24, Owner'S Manual, Page: 85 / 211

Share
Download
Yamaha D24 Owner'S Manual Download Page 85

80

Chapter 8—Editing Projects

D24—Owner’s Manual

Deleting Projects

The Project Delete function is used to delete a project.

1

Press the [EDIT] button.

The EDIT indicator lights up.

2

Use the JOG/DATA dial to select “PROJECT EDIT,” and then press the [ENTER] 
button.

3

Use the JOG/DATA dial to select “DELETE,” and then press the [ENTER] button.

“PROJECT nn—project title” appears on the display (“nn” and “project title” being the 
number and title of the project to be deleted).

4

Use the JOG/DATA dial to select the project that you want to delete, and then 
press the [ENTER] button.

“DEL PROJ nn—ARE YOU SURE” appears on the display.

5

Press the [ENTER] button to delete the selected project, or the [CANCEL] but-
ton to cancel.

The selected project is deleted.

When the delete operation is complete, “FINISHED” appears on the display.

To delete another project, press the [ENTER] button to return to step 4.

6

Press the [EDIT] button to leave edit.

The EDIT indicator goes out.

In the following example, project 2 is deleted.

When a project’s contents are deleted, the time available for additional recording is 
increased.

Deleted

01 PROJECT

03 PROJECT

04 PROJECT

01 PROJECT

02 PROJECT

03 PROJECT

04 PROJECT

Summary of Contents for D24




















































































































































































































Reviews:

No comments