Time Compression
113
D24—Owner’s Manual
The following illustration shows the procedure for auditioning.
Rec Mode
16
Having selected “REC,” press the [ENTER] button.
“TIME COMP—FROM TR nn” appears on the display (“nn” being the source track
containing the material to be processed).
17
Use the JOG/DATA dial to select the source track.
You can select individual tracks or track pairs: 1–8 or 1/2–7/8. To compress a virtual
track, assign it to a main track first, and then compress the main track.
18
Press the [ENTER] button.
“TIME COMP—ST MARK IN” appears on the display (“ST” being the start point of
the part to be processed).
19
Use the JOG/DATA dial to select one of the following points: MARK IN, MARK
OUT, MARK A, MARK B, or a locate memory from 1 through 99.
20
Press the [ENTER] button.
“TIME COMP—ST 00:00:00.00.0” appears on the display (“00:00:00.00.0” being the
position of the selected point).
21
Use the JOG/DATA dial or keypad to adjust the start position, and then press
the [ENTER] button.
“TIME COMP—ED MARK IN” appears on the display (“ED” being the end point of
the part to be processed).
22
Use the JOG/DATA dial to select one of the following points: MARK IN, MARK
OUT, MARK A, MARK B, or a locate memory from 1 through 99.
23
Press the [ENTER] button.
“TIME COMP—ED 00:00:00.00.0” appears on the display (“00:00:00.00.0” being the
position of the selected point).
24
Use the JOG/DATA dial or keypad to adjust the end position, and then press
the [ENTER] button.
If the duration of the specified part is less than 15 milliseconds, the minimum size, the
message “TOO SHORT” appears.
“TIME COMP—TO V_TR nn” appears on the display (“nn” being the virtual track to
which the processed material will be recorded).
ST point
00:01:00.00
Audition
From TR: 2
ENTER
ENTER