Using
Your Instrument with Other Devices
CVP-409/407 Owner’s Manual
194
Connecting External MIDI
Devices (
7
[MIDI] Terminals)
Use the built-in [MIDI] terminals and standard MIDI
cables to connect external MIDI devices.
For a general overview of MIDI and how you can effec-
tively use it, refer to the following sections:
• What is MIDI?..............................................page 196
• What You Can Do With MIDI.......................page 199
• MIDI Settings ...............................................page 200
Connecting a Computer, USB
Device, or Internet (
789)
)
Connecting a Computer
(
7
[MIDI] and
8
[USB TO HOST] Terminals)
By connecting a computer to the [USB TO HOST] or
[MIDI] terminals, you can transfer data between the
instrument and the computer via MIDI, and take advan-
tage of sophisticated computer music programs. Keep in
mind that you also need to install an appropriate USB-
MIDI driver.
The instructions below explain how to connect and use
the terminals.
n
If you are using a computer that has a USB interface, we recom-
mend that you connect the computer and the instrument by USB,
rather than by MIDI.
n
Driver
A driver is software that provides a data-transfer interface between
the computer’s operating system and a connected hardware
device. You need to install a USB-MIDI driver to connect the com-
puter and the instrument. Refer to the separate Installation Guide
(page 4).
This explanation is divided into two parts, covering the
two connections: connection to the [USB TO HOST]
terminal and connection to the [MIDI] terminal.
• Connecting to the [USB TO HOST] terminal
When connecting the instrument to the computer via
USB, use a standard USB cable (having the USB logo)
to connect the [USB TO HOST] terminal on the
instrument to the USB terminal of the computer. Then,
install the USB-MIDI driver.
n
About the [USB TO HOST] and [USB TO DEVICE] terminals
There are two different types of USB terminals on the instrument:
[USB TO HOST] and [USB TO DEVICE]. Take care not to confuse
the two terminals and the corresponding cable connectors.
Be careful to connect the proper plug in the proper direction. Expla-
nations on the [USB TO DEVICE] terminal follow in the next section.
n
• The instrument will begin transmission a short time after the
USB connection is made.
• When using a USB cable to connect the instrument to your
computer, make the connection directly without passing
through a USB hub.
• For information on setting up your sequence software, refer to
the owner’s manual of the relevant software.
• Connection by [MIDI] terminals
There are two ways to connect the instrument via MIDI
to a computer. If you have a MIDI interface built into
your computer, connect the MIDI OUT terminal of the
computer interface to the [MIDI IN] terminal of the
instrument, and connect the [MIDI OUT] terminal of
the instrument to the MIDI IN terminal of the interface.
MIDI IN
Receives MIDI messages from an external
MIDI device.
MIDI OUT
Transmits MIDI messages generated by the
instrument.
MIDI THRU
Simply relays the MIDI messages received at
MIDI IN.
Instrument
USB cable
CAUTION
Precautions when using the [USB TO HOST] terminal
When connecting the computer to the [USB TO HOST] termi-
nal, make sure to observe the following points. Failing to do so
risks freezing the computer and corrupting or losing data. If the
computer or the instrument freezes, turn the power to the
instrument off and restart the computer.
• Use an AB type USB cable of less than about 3 meters.
• Before connecting the computer to the [USB TO HOST] ter-
minal, exit from any power-saving mode of the computer
(such as suspended, sleep, standby), and quit any open appli-
cation software, also turns off the power to the instrument.
• Execute the following before turning the power to the instru-
ment off or unplugging the USB cable to/from the instrument/
computer.
- Quit any open application software on the computer.
- Make sure that data is not being transmitted from the
instrument. (Data is transmitted only by playing notes on
the keyboard or playing back a song.)
• While a USB device is connected to the instrument, you
should wait for six seconds or more between these
operations: When turning the power of the instrument
off then on again, or when alternately connecting/dis-
connecting the USB cable.
Instrument
MIDI cable
[MIDI IN]
terminal
[MIDI OUT]
terminal
Computer with MIDI
interface installed
[MIDI OUT]
terminal
[MIDI IN]
terminal
Connecting external MIDI devices ([MIDI] terminals)/Connecting a Computer or USB Device